Advertisement
Quick Start Guide
6.
Click on the FX tab in the Browser. You will see
an assortment of Reverb and Delay presets.
7.
Choose a Reverb preset and drag it onto FXA.
8.
Again, while speaking into the microphone, adjust the FXA
Send level up until you are happy with the amount of reverb.
9.
If you would like to record with the Fat Channel effects, enable
the Post button at the top of the Channel strip.
10. Click back over to Studio One and click the "Record" button in
Studio OneArtist to begin recording your first masterpiece!
11. To playback your recording, click on the "Return
to Zero" button in the transport in Studio One
Artist and then click on the "Play" button.
Set your Levels and Record!
Creating a Monitor Mix Using VSL
4
4.1
15
Advertisement
