Page 1
ADL 700 Channel Strip Owner’s Manual English Español Deutsch ® Français www.presonus.com...
Page 2
The lightning flash with arrowhead symbol within an equilateral been dropped. All PreSonus products in the USA should be serviced at the triangle is intended to alert the user to the presence of uninsulated PreSonus factory in Baton Rouge, Louisiana.
Thank you for purchasing the PreSonus ADL 700. PreSonus Audio Electronics has designed the ADL 700 utilizing high-grade components to ensure optimum performance that will last a lifetime. The ADL 700 is a professional channel strip that includes a tube preamplifier with the same design as the award-winning ADL 600.
• Four-band, semi-parametric EQ • Dual-mode analog VU metering (output and gain reduction) What’s in the Box In addition to this manual, your ADL 700 package contains the following: PreSonus ADL 700 Channel Strip. IEC power cable.
Measured in ohms, impedance is a way of expressing a circuit’s opposition to a signal attempting to pass through. Lowering or raising the ADL 700 mic-input impedance can create subtle coloring and filtering effects, enabling you to get a wider variety of tonalities without using the EQ.
-20 dB Pad: The pad provides 20 dB of attenuation for the microphone preamp only. Power User Tip: The 20 dB pad reduces the signal level coming into your ADL 700, helping to prevent clipping and distortion from high-gain sources. Padding the input increases “headroom”...
However, if you place the EQ before the compressor, you can better control different Deutsch frequencies, achieving a more natural response. The ADL 700 provides the flexibility to choose which signal flow is right for your application at any given time.
Page 10
ADL 700 EQ Controls Low Band Frequency: Sets the center frequency of the EQ’s low-frequency band. You can adjust the center frequency from 20 to 250 Hz. Low Band Gain: Sets the attenuation or boost of the EQ’s low band. The gain can be set between -16 and +16 dB.
VU Meter and Controls VU Meter: The analog VU meter displays the ADL 700’s output level. When the Meter – GR switch is enabled, the VU meter will show the amount of gain reduction being applied by the compressor.
Plugging a line-level source into the instrument input on the front of the ADL 700 risks damage to the circuit and is likely to produce a very loud and distorted audio signal. So don’t do that! Mic Input: The ADL 700 mic preamp works great with all types of microphones including dynamic, ribbon, and condenser microphones.
Page 13
Stereo Link function occasionally. Unless one of the units has its Threshold knob switched to the ST position, the two units will act independently. Output: The ADL 700’s output jack employs a balanced XLR connection. Power User Tip: All input and output connectors are transformer-...
Owner’s Manual Stereo Linking Two ADL 700s Stereo Linking Two ADL 700s 2. Determine which unit you would like to be the 1. Connect a TRS cable to the Comp Link connection slave and turn its Threshold knob to the ST of the back of both of the ADL 700s.
Page 16
ADL 700 Stereo Linking Two ADL 700s 3. The Link LED will illuminate when Stereo Link 4. The compressor controls on the slaved unit will mode is enabled. no longer have any effect on the audio. 5. Use the Threshold, Attack, Release, and Ratio 6.
Tutorial A Brief Tutorial on Dynamics Processing ADL 700 includes a custom FET Compressor. What follows is an excerpt from a brief tutorial on dynamics processing written by PreSonus president and founder Jim Odom. It is included to help you get the most out of your ADL 700.
Owner’s Manual A Brief Tutorial on Dynamics Processing The world’s best mixing consoles offer compression on every channel because most instruments need some form of compression, often very subtle, to be properly heard in a mix. 3.1.2 Compression Demystified Punch, apparent loudness, presence—these are just three of the many terms used to describe the effects of compression.
Equalizers Your ADL 700 is equipped with a 4-band semi-parametric EQ. Here’s a brief explanation of how an EQ functions, as well as some charts to help you navigate the frequency ranges of various instruments so you can quickly choose the best EQ settings for your recordings and live mixes.
Owner’s Manual Equalizers bandwidth is also useful in boosting pleasant tones of an instrument such as the attack. Take for instance, a kick drum. A kick drum resonates somewhere between 60 to 125 Hz, but the attack of the kick drum is much higher at 2 to 5 kHz.
Page 22
ADL 700 Equalizers • Your memory is not what you think it is. Comparing a flat EQ and the curve that you’ve created allows you to see and hear exactly what you’ve done. So be honest with yourself. Sometimes that EQ setting you’ve been working on for 15 minutes is not the right choice, so move on.
Page 23
Owner’s Manual Equalizers Table 2 English Español Deutsch Français...
PreSonus to get your ADL 700 repaired. Not passing audio. If the ADL 700 appears to power on but it’s not passing signal (the lights are on but nobody’s home), first check all the cables connected to your ADL 700 and make sure that they are working correctly.
PreSonus reserves the right to update any unit returned for repair. PreSonus reserves the right to change or improve the design of the product at any time without prior notice. This warranty does not cover claims for damage due...
Page 29
Owner’s Manual English Español Deutsch Français...