Powering Up The Scanner; Recharging The Scanner In The Cradle; Scanning With The Phaser - Symbol P360 Quick Reference Manual

Q u i c k R e f e r e n c e

Powering Up the Scanner

To turn the scanner on, press the "Enter" key or pull the trigger. The
scanner is automatically brought out of sleep mode and into
scanning mode.

Recharging the Scanner in the Cradle

To recharge the scanner, place it front-side down into the cradle.
Make sure that the contacts in the bottom of the scanner match up
with the metal contacts on the cradle.
A full re-charge takes up to 4 hours, you may need less time
depending upon the remaining charge in the battery. The LED light
on the bottom of the cradle becomes solid to alert you when the
battery has been recharged.

Scanning with the Phaser

For POS operation, the scanner ships with a default application that
is ready-to-use right out of the box. Otherwise, consult the Phaser
Series Scanner Product Reference Guide (p/n 70-33629-xx) for
programming instructions. If you need assistance, contact your
local supplier or Symbol Support Center.
5