Charging The Scanner In The Cradle; Powering Up The Scanner - Symbol P370 Quick Reference Manual

Quick Reference Guide
Introduction
The P470/370 cordless RF scanners bring new flexibility and economy to data
capture and data management in both industrial and retail operations. The
scanner communicates with your host computer through radio transmission
instead of through a cable. With the RF scanner, you are free to scan and transmit
without a physical cable, from as far away as 100 feet (30.5 meters) even without
a direct line of sight. This lets you take the scanner to where the work is, whether
on the loading dock, the plant floor, the warehouse, or the POS checkout area.
There are several versions available:
P470: cordless retail scanner.
-
P370: cordless industrial scanner.
-
P370 ALR: cordless industrial ALR scanner.
-
This Quick Reference Guide provides basic instruction on the set up and use of
the Phaser P370/P470 RF scanners.
Refer to PL 370/470 RF Cradle Quick Reference Guide (p/n 72-38494-xx) for
information on setting up the PL 370/470 RF cradle.
To quickly get you started with your new scanner:
Charge the scanner in the cradle.
1.
Power up the scanner.
2.
Follow the Quick Startup Instructions (see
3.
Use the test bar codes to ensure the scanner is working properly (see
4.

Charging the Scanner in the Cradle

Charge Status
Indicator Light

Powering Up the Scanner

To turn the scanner on, press the "Enter" key or pull the trigger. The scanner is
brought out of sleep mode and into scanning mode.
page
To charge the scanner, insert the scanner into
the cradle so the nose of the scanner and tip of
the handle seat into the receptacles. The
scanner displays "UNIT CRADLED" when
properly inserted in the cradle.
The battery charges automatically. A full charge
of a depleted battery takes approximately 3-1/2
hours. The charge status indicator light on the
back of the cradle blinks then becomes solid
when the battery is fully charged.
6).
3
page 7).