Introduction & Important Safety Information - Hotsy 1424SS Operator's Manual

Gas-fired series
Table of Contents

Advertisement

INTRODUCTION & IMPORTANT SAFETY INFORMATION
Thank you for purchasing this Pressure Washer.
We reserve the right to make changes at any time
without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understanding of
the manufacturer's operating instructions and warnings
before using this pressure washer. Warning information
should be emphasized and understood. If the operator
is not fluent in English, the manufacturer's instructions
and warnings shall be read to and discussed with
the operator in the operator's native language by the
purchaser/owner, making sure that the operator com-
prehends its contents.
Owner and/or user must study and maintain for future
reference the manufacturers' instructions.
The operator must know how to stop the machine
quickly and understand the operation of all controls.
Never permit anyone to operate the engine without
proper instructions.
This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.
When ordering parts, please specify model and
serial number. Use only identical replacement
parts.
This machine is to be used only by trained
operators.
IMPORTANT SAFETY
INFORMATION
WARNING: To reduce the risk of
injury, read operating instruc-
tions carefully before using.
READ OPERATOR'S
MANUAL THOROUGHLY
PRIOR TO USE.
2. Know how to stop the machine and bleed pressure
quickly. Be thoroughly familiar with the controls.
3. Stay alert — watch what you are doing.
4. Do not replace LP tank while machine is running.
5. All installations must comply with local codes. Con-
tact your electrician, plumber, utility company or the
selling distributor for specific details. If your machine
is rated 250 volts or less, single phase will be pro-
vided with a ground fault circuit interrupter (GFCI).
If rated more than 250 volts, or more than single
phase this product should only be connected to a
6
power supply receptacle protected by a GFCI.
1. Read the owner's manual
thoroughly. Failure to follow
instructions could cause mal-
function of the machine and
result in death, serious bodily
injury and/or property dam-
age.
HOTSY • 900-1400 • 8.914-405.0 GAS FIRED • Rev. 8/11b
DANGER: Improper connection of the equip-
ment-grounding conductor can result in a risk of
electrocution. Check with a qualified electrician or
service personnel if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician. Do not use any type of adaptor with
this product.
WARNING: Keep wand, hose, and
WARNING
water spray away from electric
wiring or fatal electric shock may
result.
6.
KEEP WATER
SPRAY AWAY FROM
ELECTRICAL WIRING.
to a UL grounded receptacle of proper voltage and
amperage ratings. Do not spray water on or near
electrical components. Do not touch machine with
wet hands or while standing in water. Always dis-
connect power before servicing.
WARNING: Flammable liquids
WARNING
can create fumes which can ig-
nite, causing property damage
or severe injury.
WARNING: Risk of explosion
— Operate only where open
RISK OF EXPLOSION:
flame or torch is permitted.
IF GAS SMELL
PRESENT TURN OFF
SUPPLY
WARNING: Risk of fire — Do not
WARNING
change tanks when the product
is operating or still hot.
WARNING: Use vapor fuel only.
7.
RISK OF FIRE.
DO NOT ADD FUEL
WHEN OPERATING
MACHINE.
8. Keep operating area clear of all persons.
WARNING: High pressure spray
WARNING
can cause paint chips or other
particles to become airborne
and fly at high speeds. To avoid
personal injury, eye, hand and
foot safety devices must be
USE PROTECTIVE
worn.
EYE WEAR
AND CLOTHING
9. Eye, hand, and foot protection
WHEN OPERATING
THIS EQUIPMENT.
To protect the operator from
electrical shock, the machine
must be electrically grounded.
It is the responsibility of the
owner to connect this machine
Oil burning appliances shall
be installed only in locations
where combustible dusts and
flammable gases or vapors
are not present. Do not store
or use gasoline near this ma-
chine.
must be worn when using this
equipment.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents