Assembly Instructions - Hotsy 1424SS Operator's Manual

Unpacking
Unpack carefully. Wear safety glasses or goggles while un-
packing, assembling or operating pressure washer. If there
are missing components or hidden damage immediately
contact distributor or carrier concerning discrepancies.
1. Cut strapping band from pressure washer
and pallet.
2. Remove pressure washer from pallet.
Parts Included
• Pressure Washer
• Pressure Hose
• Hose Hanger
• Wand
• Wand Holder
• Parts Box Containing:
■ Pressure Nozzles (3 ea.)
■ Trigger Gun
• Operating Instructions and Parts Manual
Tools Required
• 10" Adjustable Crescent Wrenches (2 ea.)
• Blade Screwdriver
Pressure Hose, Wand and Wand Holder
1. Use teflon tape on plumbing connections to prevent
leakage.
2. Install pressure hose on machine as shown.
3. Assemble wand components as shown. Connect
pressure hose to trigger gun.
NOTE: The nozzle is not to be installed at this time.
Pressure Hose
10

ASSEMBLY INSTRUCTIONS

Relief Valve
HOTSY • 900-1400 • 8.914-405.0 GAS FIRED • Rev. 8/11b
4. Make sure that all plumbing connections are tight.
Quick Disconnect Plug
Trigger Gun
Pressure Hose
Hose Hanger
1. Install the hose hanger on the machine coil tank as
shown.
Hose Hanger
Wand
Quick
Disconnect
Pocket On
Coil Tank