Table of Contents
Advertisement
1. Latch plate
2. Buckle
3. Release button
Fastening of Seat Belts
Pull belt with latch plate (1) across
shoulder and lap. Push latch plate (1)
into buckle (2) until it clicks. The lap
belt should be positioned as low as
possible on your hips and not across
the abdomen. Do not twist the belt. A
twisted seat belt may cause injury.
For safety reasons, avoid adjusting the
seat or seat back into positions which
could affect the correct seat belt
position.
Press switch (4) to adjust seat belt so
that the shoulder portion is located as
close as possible to the middle of your
shoulder.
The shoulder portion of the seat belt
must be pulled snug and checked for
snugness immediately after engaging it
and during driving. Tighten the lap
portion to a snug fit by pulling
shoulder portion up.
41
Hide quick links:
Advertisement
Table of Contents
