Connecting To An External Amplifier - JVC TM-2001U User Manual

Connections
Cable and VCR Connections - Continued
Diagram #2
INPUT
S-VIDEO
OVER
75 75
AUDIO OUT
(VHF/UHF) (VHF/UHF)
VIDEO
L
L/ MONO
R R
Illustration of TM-2701SU
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output on the cable box, in to the RF Input on the back of the
VCR.
3) Connect an RF cable from the RF Output on the VCR, in to the RF Input on the back of the TV.
• Please consult your VCR's owner's manual for more information on its operation.
• See page 13 for instructions on making stereo connections with your VCR.
The connection diagrams are intended to show some basic connections. Some cable
companies may require special connections to properly use your television. If you follow
these diagrams and the television does not work properly, contact your local cable
operator for more connection information.
12
Cable
Box
OUT IN
VCR
(Yellow)
IN (White)
(Red)
OUT
Stereo VCR/DVD Connections
You can use the connection shown below for high-quality stereo sound from your HiFi VCR. You can
also use this diagram to connect your television to a DVDplayer.
• The S-Video connection is available only on the TM-2701SU
Illustration of TM-2701SU
IN
BNC
INPUT INPUT
Connector OUT
box
S-VIDEO
OVER
75
AUDIO OUT AUDIO OUT (VHF/UHF)
VIDEO
L
L/ MONO
R R
1) Connect the yellow video cable out from the VCR's Video Output, in to the BNC connector box Input
jack, OR connect an S-Video cable from the VCR's S-Video Output, to the TV's S-Video Input.
2) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input Jack.
3) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.

Connecting to an External Amplifier

INPUT
S-VIDEO
OVER
75
AUDIO OUT
(VHF/UHF)
VIDEO
L
L/ MONO
R R
Illustration of TM-2701SU
1) Connect the white audio cable from the TV's Left Audio Output jack to the Amplifier's Left Audio Input jack.
2) Connect the red audio cable from the TV's Right Audio Output jack to the Amplifier's Right Audio Input jack.
• See also "TV Speaker" on page 33 for more information on using external speakers.
Connections
Stereo VCR or DVD Player
IN
OR
13