Pocket Computer Basic - Radio Shack PC-2 TRS-80 Owner's Manual

Next type:
When the Ready prompt reappears, type:
( (ENTER)
,-j
and the average mileage (34.28571429) will be displayed on the right.
Pocket Computer BASIC
The PC-2 recognizes almost all standard BASIC commands and statements as well as several non-standard BASIC
keywords.
This section will describe those non-standard BASIC commands and statements (i.e., those commands recognized
by the PC-2 but not by most other computers that use the BASIC Language). If you're familiar with standard
BASIC, you should be able to begin programming after reading this section.
This section will not describe the BASIC commands used with the Printer/Cassette Interface or with any other
PC-2 peripheral. For a discussion of those commands and statements, see your optional device's owner's manual
and a PC-2 programming guide.
For a complete list (including syntax, example, and abbreviations) of the BASIC commands the PC-2 uses, see
Appendix A.
50