Reserve Mode Change; Recall Function Key Assignments - Radio Shack PC-2 TRS-80 Owner's Manual

commands, numeric values, etc.) you want.
Function Keys can be assigned when the PC-2 is in the RESERVE Operation Mode. For instructions on assigning
values to keys
CID
~
C£ID
,see RESERVE Mode earlier in this manual.
GJ
Reserve Mode Change
An additional Function Key feature is that the PC-2 really has 18 Function Keys, not just six.
Press the
GJ
key a few times. Notice that Reserve Mode Indicator (in the upper right of the Display) changes
from I to II to III and back to 1.
For details on using
GJ
,see RESERVE Mode earlier in this manual.
(RCL)
Recall Function Key Assignments
The Recall Key (
(RCL) )
acts as a "toggle" between whatever is on the Display at any particular time and the
menu of Function Key assignments for whichever Reserve Mode (l/II/III) is indicated.
For instance, let's say you are writing a program line (in PROgram Mode) and need to use a value assigned to a
Function Key. The problem is you've forgotten what values were assigned to what key. You can press
GJ
to
recall the menus in the different Reserve Modes (see RESERVE Mode) and then, by pressing
(FlCi.)
,yOU
can