[13]
Maintenance and Priority Codes
Maintenance Codes are transmitted to indicate various trouble conditions and their restorals; Priority Codes
are used to indicate the activation of the [F], [A] and [P] keys. Program a 2-digit code for each of the following
conditions:
• Battery Trouble
• Battery Trouble Restore
• Periodic Test Code
The Periodic Test Code is transmitted to the monitoring station once every 24 hours. The first transmission will
be sent 12 hours after the system is first powered, and then once every 24 hours after the initial transmission.
If the Police Code is programmed it will be transmitted to the monitoring station if two or more alarms occur on
different zones during the same armed period. The Police Code will be sent immediately after the transmission
of the second alarm code.
[14]
Downloading Access Code
This 4-digit code allows the system to confirm that it is communicating with a valid downloading computer. Enter
a 4-digit code using the numbers 0 through 9; the hexadecimal numbers A through F may also be used in this
code. The default code is [0505].
• [P] Key alarm
• [P] Key restore
• [A] Key alarm
• [A] Key restore
• [F] Key alarm
• [F] Key restore
• Police Code
17