Setting Up Your Tv - JVC HV-29JH24, HV-29JH54, HV-29JH74, HV-29VH14, HV-29JH54 Instructions Manual

Setting up your TV

CAUTION
• Turn off all the equipment including the
TV before connecting anything.
1 Connecting the aerial and VCR
• Aerial cable is not supplied. Use a
good quality 75-ohm coaxial cable.
• Read the manual that came with the
VCR before connecting.
If not connecting a VCR (see Fig. A):
Connect an aerial cable to the aerial socket
on this TV.
If connecting a VCR (see Fig. B):
1 Connect the aerial cable to the aerial
input socket on the VCR, and connect
the VCR and TV with another aerial
cable.
2 Connect the VCR's VIDEO OUT (video
output) jack and the TV's VIDEO jack
with a video cable.
To connect a VCR to the TV with an S-
VIDEO cable:
Connect the VCR's S-VIDEO OUT (S-
VIDEO output) connector and TV's S
connector with an S-VIDEO cable A,
instead of connecting with a video cable.
3 Connect the VCR's AUDIO OUT (audio
L/R output) jacks and the TV's AUDIO
jacks (L/MONO and R) with an audio
cable.
• If the VCR's audio output is in mono,
connect the VCR's AUDIO OUT (audio
output) jack and the TV's AUDIO L/
MONO jack with an audio cable.
Fig. A
Back of the TV
AUDIO
R L/MONO VIDEO
OVER
P /C P /C Y/VIDEO
R R B B
AUDIO
R L/MONO
R L VIDEO
AUDIO
Fig. B
Back of the TV
AUDIO
R L/MONO VIDEO
P /C P /C
R R B B
AUDIO
R L/MONO
R L VIDEO
AUDIO
S
VIDEO-1
VIDEO-2
VIDEO-3/
COMPONENT
OUTPUT
S
OVER
VIDEO-1
VIDEO-2
Y/VIDEO
VIDEO-3/
COMPONENT
OUTPUT
3