System Unit Cover - Compaq Deskpro 4000N Maintenance & Service Manual

5.7

System Unit Cover

To remove the system unit cover, complete the following steps:
1. Prepare the computer for disassembly (Section 5.4).
2. Press in the quick release cover latch on each side of the front bezel to release the hood latches.
3. Slide the cover forward about 1-inch (2.5-cm); then, lift it up and off the unit.
Figure 5-7. Removing the System Unit Cover
To replace the cover, reverse the above procedure.
Compaq Deskpro 4000S and 4000N Personal Computers 5-11