Direct Entry Of A Phone Number; Phone Book - Skoda Infotainment Navigation Columbus Owner's Manual

Direct entry of a phone number

›
Press the button .
→
PHONE

A screen appears to enter the phone number
Delete the digit

Dial the entered number 1)

- Add a prefix if this option has been set in the phone settings
2)

The input screen also functions as an alphanumeric keypad that you can use to
search for contacts in the phonebook.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc.
Select the desired contact by pressing the corresponding function key.

Phone book

›
Press the button → .
PHONE

The internal phonebook provides 2 000 free memory locations. Each contact can
contain up to 5 telephone numbers.
1)
If no number is entered, the last dialled number will be displayed after you press the button
2)
If the addition of a prefix option is switched on, but the prefix is not entered in the phone settings,
the last dialled number will be displayed in the input field after you press the button
has been defined and a number has been entered in the input line, the prefix will be added before
the telephone number and the system will attempt to establish a connection when you press the
button .

3)
Some mobile phones do not support downloading of contacts from the SIM card.
36
Phone
Fig. 22
Direct entry of a phone number
» Fig. 22.
» page 37
.

. If the prefix

Downloading and updating the phone book
Upon the first connection of the mobile phone with the hands-free system, the
system begins to download the phone book from the phone and from the SIM
card into the memory of the control unit.
3)
If the phonebook downloaded from the mobile phone contains more than
2 000 contacts, loading is stopped and the message Contacts not completely im-
ported appears on the screen. Only the already downloaded contacts will be
available.
Each time the mobile phone has established a new connection with the hands-
free system, the relevant phone book will be updated.
During the update, the phone book which was stored after the last completed up-
date will be available. Newly stored telephone numbers are only shown after the
updating has ended.
If an error occurs while loading the phone book, the message Import failed.
Please try again and check whether the BT device allows connections.
You can start the update manually with a function in the phone mode set-
tings.» page 37
Find contact
Press the button to open the input screen with keypad to search in the pho-
Find
nebook » page 8.
Select contact
Press the function key for the desired contact to dial the telephone number.

Where a contact contains several telephone numbers, the system displays a
menu containing the telephone numbers for the contact.
Contact details
Press to display the contact details.

