Table of Contents
Advertisement
VC720502MUK Rev2_Instruction Book 07/06/2013 15:41 Page 5
Operating the appliance
IMPORTANT: Please remember that the steam cleaner operates by emitting steam at an increased
temperature of 115
which cannot resist this temperature, or on surfaces with coatings or polishes, or on delicate materials
such as dralon, plastic, natural fur or antique items etc.
If in doubt, check carefully on a part of the material where minor marks will not matter.
Dual functionality
Upright steam cleaning Handheld steam cleaning
Upright steam cleaning: assembly
A
D
C
o
C. Always test on an inconspicuous area first. Never use it on objects or surfaces
B
E
Your steam cleaner can easily be configured into
two different cleaning modes:
•
Upright steam cleaner for floors and carpets.
•
Handheld steam cleaner
or hard to reach surfaces.
Attachments
(27-36)
can be used on the
handheld steam cleaner.
A
Insert the handle
(1)
onto the main body (7).
B
Insert one of the screws (supplied) into the
hole in the lower cord storage hook
rotate until tight.
Insert the other screw (supplied) into the side
of the handle (on the opposite side to the
lower cord storage hook) and rotate until tight.
NOTE: Attaching the handle is necessary for
first time assembly only.
C
Lower the main body onto the floorhead (22),
with the floorhead release button
neck of the floorhead to the back of the
assembly, until it clicks into place.
D
Insert the steam outlet nozzle at the bottom
end of the handheld steam cleaner
adaptor at the bottom of the space in the front
of the main body.
Push the handheld steam cleaner firmly into
the space in the main body until it clicks into
place.
E
Attach the micro-fibre floor cloth
floorhead and tighten the toggle
rear.
(9)
for cleaning vertical
(5)
and
(21)
on the
(9)
into the
(24)
to the
(25)
at the
5
Hide quick links:
Advertisement
Table of Contents
