Advertisement
Current Location
Calculate Current Location
The device needs to calculate your current location
before it can successfully add content.
1.
Follow the instructions on page 6 to install
the
device.
2.
Press and hold the power button.
3. Once the satellites are being tracked, the
device will begin receiving information
that it will calculate into a current location
value.
Not receiving
satellite information
Receiving satellite
information
4.
When the current
location
has been
calculated,
the displayed map will change
and the blue arrow icon will indicate your
location.
Tips
Various
factors influence GPS signal reception and
there are some tips you can follow to improve the
signal reception and time it takes to calculate the
current
location.
• Leave any enclosed structure,
(garage,
parking
structures,
etc.).
• Make sure you have a 'clear view of the
sky'. Buildings and trees can have an
impact on GPS signal reception. The less
obstructions,
the easier the signal reception
IS.
• Be sure that the device
is
mounted where
it can have a clear line of sight to the
windshield.
Note: The first time the device calculates its
location can take up to 1 minute, subsequent times
will be 1 5 seconds on
average.
Get more information at
www.magellangps.com.
7
Advertisement
