Advertisement
OBJ_BUCH-0000000148-001.book Page 27 Tuesday, February 25, 2014 12:35 PM
ing the vacuum cleaner must observe
the relevant safety regulations for the
materials being vacuumed.
Wear personal protective equipment.
Depending on application, use face
shield, safety goggles or safety
glasses. Where appropriate, wear
dust mask, hearing protectors, gloves
and workshop apron capable of stop-
ping small abrasive or workpiece
fragments. The eye protection must
be capable of stopping flying debris
generated by various operations. The
dust mask or respirator must be capa-
ble of filtrating particles generated by
your operation. Prolonged exposure
to high intensity noise may cause
hearing loss.
Operate the vacuum cleaner only from
socket outlets with earthing contact
that are according to regulations. Use
only undamaged supply cords and
regularly checked extension cords
with earthing contact. A protective
conductor without continuity can lead
to electric shock.
When wet vacuuming, operate the
vacuum cleaner only when the con-
tainer is level. Otherwise there is
danger of electric shock from water
penetrating into the vacuum cleaner
motor.
Do not misuse the power supply cord
to pull the vacuum cleaner around or
pull the mains plug from the socket
outlet. Keep the power supply cord
away from heat, oil sharp edges, or
moving parts. Do not drive over or
pinch the power supply cord. Dam-
aged or entangled power supply cords
increase the risk of an electric shock.
Before replacing accessories, pull the
mains plug from the socket outlet.
This safety measure reduces the risk
of electric shock.
Do not vacuum materials that are haz-
ardous to one's health, e. g., dust from
beech or oak wood, masonry dust,
asbestos. These materials are consid-
ered carcinogenic.
Provide for good ventilation of the
workplace.
Do not vacuum inflammable or explo-
sive fluids; for example, benzene, oil,
alcohol, solvents. Do not vacuum hot
or inflammable dusts. Do not operate
the vacuum cleaner in rooms where
the danger of an explosion exists. The
dusts, vapours or fluids can ignite or
explode.
Do not rivet or screw any name-plates
or designs to the vacuum cleaner. If
the insulation is damaged, protection
against an electric shock will be inef-
fective. Adhesive labels are recom-
mended.
Do not use accessories not specifi-
cally intended or recommended for
this vacuum cleaner. Just because the
accessory can be attached to your vac-
uum cleaner, it does not assure safe
operation.
Before starting operation (see page
6–9), check the power supply cord
and the mains plug for damage.
Use the vacuum
WARNING
cleaner's socket out-
let only for connection of an external
power tool. The vacuum cleaner is
automatically switched on and off via
the connected power tool.
en
27
Advertisement
