Securing The Refrigerator; Inserting Of The Decor Panel - Dometic RM 8400 Installation Instructions Manual

4.6

Securing the refrigerator

In the sidewalls of the refrigerator, there are
four plastic sleeves for securing the refrigera-
tor. The sidewalls or strips attached for secu-
ring the refrigerator must be prepared to hold
the screws firmly in place even when under
increased load (while the vehicle is moving).
Fastening screws and caps are supplied with
the refrigerator
CAUTION!
Always insert screws through the sleeves
provided as otherwise components laid in
foam, such as cables etc., could be dama-
ged.
After the refrigerator is put in its final place,
secure the screws into the wall of the recess.
The screws must penetrate the casing of the
refrigerator.
4.7 Inserting the decor panel
Model RM 8xxx, RMS 8xxx
Remove the lateral ledge (1) the door
(ledge is attached, not screwed).
Shift decor panel (2) away from the door
and insert the new decor panel. Re-attach
ledge (1).
1
Decor panel dimensions :
Fig. 27
Casing width
Height
743 +/- 0.5 mm
Casing width
Height
743 +/- 0.5 mm
Fig. 28
17
Installation
2
486 mm
Width Thickness
472 +/- 0.5 mm max. 2.2 mm
523 mm
Width Thickness
510.5 +/- 0.5 mm max. 2.2 mm
Fig. 29