First Alert FA168CPS: FA148CP User Manual page 46

6XPPDU\RI$XGLEOH9LVXDO1RWLILFDWLRQV
SOUND
LOUD,
INTERRUPTED *
Keypad & Ext.
LOUD,
CONTINUOUS *
Keypad & Ext.
ONE SHORT BEEP
(not repeated)
Keypad only
ONE SHORT BEEP
(once every 40 secs)
Keypad only
TWO SHORT BEEPS
Keypad only
THREE SHORT
BEEPS
Keypad only
RAPID BEEPING
Keypad only
SLOW BEEPING
Keypad only
* If a bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring.
– 46 –
Technical Manuals Online! - http://www.tech-man.com
)L[HG:RUG'LVSOD\.H\SDGV 
CAUSE
FIRE ALARM
BURGLARY/AUDIBLE
EMERGENCY ALARM
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE.
c. BYPASS VERIFY
a. SYSTEM IS IN TEST MODE
b. LOW BATTERY AT A
TRANSMITTER
ARM AWAY or MAXIMUM
a. ARM STAY, NIGHT-STAY, OR
INSTANT
b. ZONE OPENED WITH
SYSTEM IN CHIME MODE.
a. TROUBLE
b. MEMORY OF ALARM
c. SYSTEM LOW BATTERY
d. EXT. SOUNDER WIRING FAIL
a. EXIT DELAY WARNING
b. ENTRY DELAY WARNING
DISPLAY
FIRE is displayed; zone number of zone in
alarm is displayed. If a fire alarm is manually
activated, zone number 95 will be displayed.
ALARM is displayed. Zone number of zone in
alarm is also displayed.
a. READY indicator light comes on.
b. Number of the open protection zone displayed.
c. Zone numbers of the bypassed protection
zones are displayed (one beep is heard for
each zone displayed). Subsequently, BYPASS
is displayed.
a. Opened zone numbers will appear.
b. BAT displayed with zone number of
transmitter.
AWAY is displayed. Red ARMED indicator is lit.
a. STAY or INSTANT is displayed. Red
ARMED indicator is lit.
b. CHIME displayed; zone number of open
protection zone will be displayed if the [✱]
key is pressed.
a. CHECK displayed. Zone number of troubled
protection zone is displayed.
b. FIRE or ALARM is displayed; zone number
of zone in alarm is displayed
c. BAT displayed with no zone ID number.
d. CHECK 70 is displayed.
a. AWAY is displayed.
b. Exceeding the entry delay time without
disarming causes alarm.