First Alert FA168CPS: FA148CP User Manual page 18

'LVDUPLQJDQG6LOHQFLQJ$ODUPV
8VLQJWKH>2))@NH\
The OFF key is used to disarm the system, silence alarm and trouble sounds, and
clear alarm memories.
IMPORTANT: If you return and the main burglary sounder is on, DO NOT ENTER, but
CONTACT THE POLICE from a nearby safe location.
If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will
beep rapidly upon your entering, indicating that an alarm has occurred during your
absence.
LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location.
1.
2. To Silence a Burglary Alarm and Clear a Memory of Alarm
3. To Silence a Fire Alarm and Clear Memory of Alarm
– 18 –
Technical Manuals Online! - http://www.tech-man.com
+ 1
(Security Code)
OFF
The "READY" indicator light will be lit if all zones
are secure, and the keypad will emit a single tone to
confirm that the system is disarmed.
NOTE: If entry delay has started (you've opened the
entry door), you do not need to press the OFF key;
simply enter your security code.
Enter your security code. This disarms the system and silences the alarm (or
warning tones of a Memory of Alarm).
Note the zone in alarm on the keypad display, and make that zone intact (close
door, window, etc.). Now enter the security code plus OFF to clear the keypad's
Memory of Alarm display.
Simply press the OFF key to silence the alarm. Then enter the security code plus
OFF sequence to clear the keypad's Memory of Alarm display. See the Fire Alarm
System section.
Alpha Display:
(-7%61)(
6)%(= 83 %61
Fixed-Word Display: READY