Functional Description - Makita HM1800 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Switch lever
ASSEMBLY
1. Bit with collar
2. Bit without coller
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
002892
CAUTION:
• Before plugging in the tool, always check to see that the switch lever
actuates properly and returns to the "OFF" position when released.
To start the tool, simply squeeze the switch lever. Release the switch lever to
stop.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing the bit
002928
This tool accepts bits either with or without a collar on its shank.
1
To install the bit, follow either procedure (1) or (2) described below.
(1) For bits with a collar
2
1
2
3
1. Bit
3. Tool holder
5. When the bit is retained
Pivot the tool retainer back and slightly downward. Insert the bit into the
tool holder as far as it will go. To securely retain the bit, return the tool
retainer to its original position.
CAUTION:
• Always assure that the bit is securely retained by attempting to pull the
bit out of the tool holder after completing the above procedure.
4
5 Fig.(1)
2. Tool retainer
4. When the bit is inserted
002934
5