Power supply
NOTE:
System board appearance may vary.
Description
300W, Active PFC + SEPA
180W, Energy Star 5.0
180W, Active PFC
180W, regular
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the power cables from the installed drives and the system board connectors:
NOTE:
(1): Main system board power connector (labeled 'PWR')
(2): Processor system board power connector (labeled 'PWRCPU')
(3): Primary hard drive
(4): Optical drive
(Access panel on page
Installed drives may vary.
(Preparation for disassembly on page
24).
23).
Power supply
55