Special Control Functions - Hamilton Beach Summit HBH850 Operation Manual

Special Control Functions

Pressing the MORE button displays cycle count screens and other diagnostic information, and also allows
you to access special functions.
Use the L or M button to scroll through the options. Press the START button to select that option.
SPECIAL FUNCTIONS
CUSTOMER SERV. INFO
START TO SELECT
RUN COOLDOWN CYCLE
START TO SELECT
AUTOBLEND 1 :B
START TO SELECT
A NOT SET
START TO SELECT
SET FACTORY DEFAULTS
START TO SELECT
CYCLE COUNTS
CYCLES INTO WARRANTY
START TO SELECT
CYCLES THIS WEEK
START TO SELECT
CLEAR WEEKLY CYCLES
START TO SELECT
CLEAR ALL CYCLES
START TO SELECT
CLEAR ALL CYCLES
PRS START TO CONFIRM
10
Displays the Hamilton Beach Commercial technical service number.
If the blender motor overheats, this message will be displayed to prompt you
to run a cool down cycle. Remove the container from the blender and press
START. Once the cycle has completed and the motor has cooled to a proper
operating temperature, the display will revert to the standby message.
Allows you to select and edit the preset cycle for the indicated button.
Indicates that there are no stored cycle settings for the indicated button.
Resets all settings except cycle counts to factory presets.
Displays the total number of cycles into the warranty period.
The display allows you to show the total number of cycles this year, this month,
this week, or for the day. Use the L or M button to scroll through the options.
Press the START button to select the desired time period to be displayed.
You may clear (reset) the number of cycles for any given time frame except the
number of cycles into warranty. Use the L or M button to scroll through the
options. Press the START button to clear the cycle counts for the desired
time period.
You may also clear (reset) ALL stored cycle counts except the number of cycles
into warranty. Press the START button to select. A confirmation message will
be displayed to confirm that you wish to clear all cycle counts.