Control Panel - Hamilton Beach BBQ0950 Operation Manual

Control Panel

NOTE: Press any key to stop operation.
Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warning
Symbol Explanations before use.
2. Place the blender on a dry, level surface.
3. Make sure the power switch is OFF ( ). Plug the
blender into a grounded 3-prong electrical outlet.
4. Place the container on the base with ingredients
and container lid in place. Close quiet shield door.
Sanitizing
Sanitize using 1 tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace lid
and filler cap and run on LOW speed for 2 minutes.
Empty container.
2. Wipe exterior with soft cloth dampened with
sanitizing solution.
Menu
Programmed Cycle Buttons
20
Back/Cancel Button
5. Turn the blender on by pressing the Power Switch
marked Reset [ON (I) / OFF ( )]. The red LED
switch indicates that power is ON (I).
6. Select the desired function.
7. Use any button to stop operation.
21
3. Immerse lid and filler cap in sanitizing solution
for 2 minutes.
4. Place empty container on base and run on HIGH
speed for 2 seconds to remove any moisture from
the cutter assembly.
5. When ready to use, rinse with clean water.
Scroll
Buttons
Enter Button
Pulse Button
22
5