CNET cn5614xr User Manual page 31

1. For the Baud rate, choose any speed between 38,400 to 115,200.
Your fax/modem will automatically adjust to the optimum
transmission speed after successfully connecting with a remote
fax/modem.
2. Many communication software use the modem response to control
program flow. Make sure that the software is set to recognize a
CONNECT 28800 response. If this does not work, set the program
to simply recognize just the CONNECT response without any baud
rate information.
3. There are three flow controls: none, hardware (CTS/RTS), and
software (XON/XOFF). Set your software to use either hardware
or software flow control.
software will not be able to detect a buffer overflow and result in
transmission errors.
4. For fax device type, choose
5. For fax speed, choose
fax/modem will automatically adjust to the optimum transmission
speed after successfully connecting with a remote fax machine or
another fax./modem.
6. Make sure that you have correctly set all the other parameters
required by the software to operate successfully.
7. Refer to your Communication software manual for details.
You are now ready to do fax/modem communication. See Chapter
5 for details.
4-2
If set to none, the communication
TR29 Class 1 .
or
automatic fastest speed
. Your
User Manual