Contents 1. Package Contents... 1 2. Minimum System Requirement... 2 3. Panel Descriptions ... 3 4. Hardware Installation... 4 5. Installing The Modem Drivers ... 5 A. Windows 98: ... 5 B. Windows ME:... 13 C. Windows XP : ... 21 D.
1. Package Contents Carefully unpack and remove the contents and contact your dealer immediately if any of the following item is missing or damaged : 56K PCI Analog Modem Telephone cable Quick Start Guide CD-Title with Windows’ driver and user manual 56K PCI DATA/FAX Modem...
2. Minimum System Requirement PC-based computer with Pentium III and above processor. One free PCI Bus slot. 64MB RAM or more. 20MB hard disk space ( System files and modem drivers only ). CD-ROM drive. Windows 98SE/ME/XP/2000 Operating System 56K PCI DATA/FAX Modem...
3. Panel Descriptions Back Panel : LINE RJ-11 jack connecting to Telephone Line. PHONE RJ-11 jack connecting to Telephone set. 56K PCI DATA/FAX Modem...
4. Hardware Installation 1. Turn off your computer. 2. Open the case of your PC and plug the 56K PCI Modem card into a free PCI slot on your motherboard. 3. Fix the 56K PCI Modem card onto your case and then close your computer case. 4.
5. Installing The Modem Drivers A. Windows 98: Driver Installation : Power on your computer to start Windows 98. Windows 98 will detect the newly-installed modem and a “Add New Hardware Wizard” window will appear. Click “Cancel” to close the hardware wizard, then place your Driver CD into the CD-ROM drive.
Page 8
A “Location Information” wizard will pop-up. Fill in your location information then click “Close” to continue. A “Make New Connection” wizard will pop-up during the driver installation process. Manually enter a name for the computer you are going to dial then click “Next” to continue. 56K PCI DATA/FAX Modem...
Page 9
Manually enter the phone number to dial then click “Next” to continue. Check your ISP for the correct phone number and setting. The Setup Wizard will ask you to review your settings before it starts to copy necessary files to your system.
Page 10
An “Install Finish !!” wizard will pop-up. Click “OK” to complete the Auto Installation process. Move your cursor as following sequence: “Start” “Settings” “Control Panel” and double click on the “Modem” icon. 56K PCI DATA/FAX Modem...
Page 11
The following window will pop-up. Click the “Diagnostics” tab and select the “PCI SoftV92 Modem” from the list then click “More Info..”. 10. The following window will pop-up. The PCI modem will responding to AT command set if the driver is properly installed and functioning correctly.
Page 12
Making sure of Internet connection Move your cursor as following sequence: “Start” “Communications” “Dial-Up Networking”. The following window will pop-up. Double click on the “56K PCI Modem Connection” icon. The following window will pop-up. Manually enter your “User name” and “Password” which provided by your ISP, then click “Connect”.
Page 13
Launch your web browser, and enter the Google Web Address: “www.google.com” in the address field then press “Enter”. The following Google website index page will display on your screen. This shows your 56K Modem connection is correctly set and access to the Internet is now available. Once you have successful connected to the Internet, a connected icon will automatically appears in you Window System task bar.
To uninstall the 56K Modem form your system, click “Start” “Settings” “Control Panel” and double click on the “Modems” icon. The following window will pop-up. Click “Remove” tab. The uninstall wizard will guides you and remove all the necessary files from your system. 56K PCI DATA/FAX Modem...
B. Windows ME: Driver Installation : Power on your computer to start Windows ME. Windows ME will detect the newly-installed modem and a “Add New Hardware Wizard” window will appear. Click “Cancel” to close the hardware wizard, then place your Driver CD into the CD-ROM drive. Windows system will automatically install the device driver and copy all the necessary files to your system.
Page 16
A “Location Information” wizard will pop-up. Fill in your location information then click “Close” to continue. A “Make New Connection” wizard will pop-up during the driver installation process. Manually enter a name for the computer you are going to dial then click “Next” to continue. 56K PCI DATA/FAX Modem...
Page 17
Manually enter the phone number to dial then click “Next” to continue. Check your ISP for the correct phone number and setting. The Setup Wizard will ask you to review your settings before it starts to copy necessary files to your system.
Page 18
An “Install Finish !!” wizard will pop-up. Click “OK” to complete the Auto Installation process. Move your cursor as following sequence: “Start” “Settings” “Control Panel” and double click on the “Modem” icon. 56K PCI DATA/FAX Modem...
Page 19
The following window will pop-up. Click the “Diagnostics” tab and select the “PCI SoftV92 Modem” from the list then click “More Info..”. 10. The following window will pop-up. The PCI modem will responding to AT command set if the driver is properly installed and functioning correctly.
Page 20
Making sure of Internet connection Move your cursor as following sequence: “Start” “Communications” “Dial-Up Networking”. The following window will pop-up. Double click on the “56K PCI Modem Connection” icon. The following window will pop-up. Manually enter your “User name” and “Password” which provided by your ISP, then click “Connect”.
Page 21
Launch your web browser, and enter the Google Web Address: “www.google.com” in the address field then press “Enter”. The following Google website index page will display on your screen. This shows your 56K Modem connection is correctly set and access to the Internet is now available. Once you have successful connected to the Internet, a connected icon will automatically appears in you Window System task bar.
Page 22
To uninstall the 56K Modem form your system, click “Start” “Settings” “Control Panel” and double click on the “Modems” icon. The following window will pop-up. Click “Remove” tab. The uninstall wizard will guides you and remove all the necessary files from your system. 56K PCI DATA/FAX Modem...
C. Windows XP : Driver Installation : Power on your computer to start Windows XP. Windows XP will detect the newly-installed modem and a “Found New Hardware Wizard” window will appear. Click “Cancel” to close the hardware wizard, then place your Driver CD into the CD-ROM drive. Windows system will automatically install the device driver and copy all the necessary files to your system.
Page 24
A “Location Information” window will pop-up. Follow the instruction and manually fill in all the necessary items then click “OK” to continue. A “New Connection Wizard” will pop-up during the driver installation process. Click “Dial-up to private network” then click “Next” to continue. 56K PCI DATA/FAX Modem...
Page 25
phone number and setting. Type a name you want for this connection then click “Finish”. An “Install Finish !!” wizard will pop-up. Click “OK” to complete the Auto Installation process. 56K PCI DATA/FAX Modem...
Page 26
Move your cursor as following sequence: “Start” “Settings” “Control Panel” and click “Phone and Modem Options”. The following window will pop-up. Click the “Modems” tab and select “PCI SoftV92 Modem” from the list then click “Properties”. 56K PCI DATA/FAX Modem...
Page 27
10. The following window will pop-up. Click the “Diagnostics” tab then click “Query Modem”. The PCI modem will responding to AT command set if the driver is properly installed and functioning correctly. Click “OK” to close the diagnostic process. 56K PCI DATA/FAX Modem...
Page 28
Making sure of Internet connection Move your cursor as following sequence: “Start” “Settings” “Network Connections” then click on “56K PCI Modem Connection”. 56K PCI DATA/FAX Modem...
Page 29
The following window will pop-up. Manually enter your “User name” and “Password” which provided by your ISP, then click “Dial”. The following connection and authentication icon will pop-up. 56K PCI DATA/FAX Modem...
Page 30
Launch your web browser, and enter the Google Web Address: “www.google.com” in the address field then press “Enter”. The following Google website index page will display on your screen. This shows your 56K Modem connection is correctly set and access to the Internet is now available. Once you have successful connected to the Internet, a connected icon will automatically appears in you Window System task bar.
Page 31
“Settings” “Control Panel” “Phone and Modem Options”. The following window will pop-up. Click “Modems” tab and select the modem type from the list then click “Remove”. The uninstall wizard will guides you and remove all the necessary files from your system.
D. Windows 2000 : Driver Installation : Power on your computer to start Windows 2000. Windows 2000 will detect the newly-installed modem and a “Found New Hardware Wizard” window will appear. Click “Cancel” to close the hardware wizard, then place your Driver CD into the CD-ROM drive. Windows system will automatically install the device driver and copy all the necessary files to your system.
Page 33
A “Network Connection Wizard” will pop-up during the driver installation process. Click “Dial-up to private network” then click “Next” to continue. Manually enter the phone number to dial then click “Next” to continue. Check your ISP for the correct phone number and setting. 56K PCI DATA/FAX Modem...
Page 34
You may make this connection available for all users, or keep it only for your own use. Select “For all users” or “Only for myself” then click “Next” to continue. Type a name you want for this connection then click “Finish”. 56K PCI DATA/FAX Modem...
Page 35
An “Install Finish !!” wizard will pop-up. Click “OK” to complete the Auto Installation process. Move your cursor as following sequence: “Start” “Settings” “Control Panel” and click “Phone and Modem Options”. 56K PCI DATA/FAX Modem...
Page 36
The following window will pop-up. Click the “Modems” tab and select “PCI SoftV92 Modem” from the list then click “Properties”. 56K PCI DATA/FAX Modem...
Page 37
10. The following window will pop-up. Click the “Diagnostics” tab then click “Query Modem”. The PCI modem will responding to AT command set if the driver is properly installed and functioning correctly. Click “OK” to close the diagnostic process. 56K PCI DATA/FAX Modem...
Page 38
Making sure of Internet connection Move your cursor as following sequence: “Start” Connections” then click on “56K PCI Modem Connection”. The following window will pop-up. Manually enter your “User name” and “Password” which provided by your ISP, then click “Dial”. 56K PCI DATA/FAX Modem “Settings”...
Page 39
The following connection and authentication icon will pop-up. Launch your web browser, and enter the Google Web Address: “www.google.com” in the address field then press “Enter”. The following Google website index page will display on your screen. This shows your 56K Modem connection is correctly set and access to the Internet is now available. 56K PCI DATA/FAX Modem...
Page 40
Once you have successful connected to the Internet, a connected icon will automatically appears in you Window System task bar. This icon will lit when receiving or transmitting data from or to the Internet. Double click the connection icon and the following window will be shown. Click “Disconnect” tab to end up the Internet connection.
Page 41
“Settings” “Control Panel” “Phone and Modem Options”. The following window will pop-up. Click “Modems” tab and select the modem type from the list then click “Remove”. The uninstall wizard will guides you and remove all the necessary files from your system.
6. Troubleshooting : Windows doesn’t detect Modem Check whether the Modem is plug into a proper extension slot. Check whether the PCI slot is enable in the BIOS. Consult on the manual of the motherboard. Check the manual of your motherboard and plug the modem into a universal 33MHz PCI slot. There is no dial tone Ensure that the telephone cable is securely connected at both ends.