Epson EB-585W User Manual page 121

List of Functions
Sub-menu
Tracking (Only available when analog RGB computer signals are being
input.)
You can adjust computer images when vertical stripes appear in
the images.
Sync. (Only available when analog RGB computer signals are being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
Position (This item cannot be set when the source is HDMI1 or HDMI2.)
You can adjust the display position up, down, left, and right when
a part of the image is missing so that all of the image is projected.
g
Interlace
Progressive
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics, and
animation.
(This item cannot be set when Image Processing is set to Fast.)
Noise Reduction
Smoothes out rough images converted using progressive. There
are two modes. Select your favorite setting. It is recommended
that this is set to Off when viewing image sources in which noise
is very low, such as for DVDs.
When the projector's HDMI1 or HDMI2 port is connected to a
HDMI Video
DVD player, the projector's video range is set according to the
Range
DVD player's video range setting. If you are worried about
floating black spots or washed out parts in the image, set to
Expanded.
You can select the input signal from the Computer1 port or the
Input Signal
Computer2 port.
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
Function
g
(i) signal is converted to Progressive
Sub-menu
Video Signal
Aspect
Overscan
(p). (IP
Image Process‐
ing
Reset
Function
You can select the input signal from the S-Video port or the
Video port. If set to Auto, video signals are recognized
automatically. If interference appears in the image or a problem
occurs such as no image is being projected when set to Auto,
select the appropriate signal according to the connected
equipment.
g
You can set the aspect ratio for projected images.
s "Changing the Aspect Ratio of the Projected Image"
(This setting can only be adjusted when a component video
signal is being input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. You
can select Auto when the source is HDMI1 or HDMI2. If you set
to Auto, this setting is changed automatically depending on the
source.
(This item cannot be selected if Easy Interactive Function is set
to PC Interactive)
When Fine is selected, priority is given to image quality, and the
image is projected.
When Fast is selected, priority is given to processing speed, and
the image is projected. This improves the pen's tracking ability
when using the interactive features.
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal and Image Processing.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.137
121
p.59