Other Useful Functions; Comparison With Preset Data; Using The Optional Volume Pedal - Korg A4 Guitar Owner's Manual

II
OTHER USEFUL FUNCTIONS
II
1 . Comparison with Preset Program Parameters
The dot on the Value display assists you in editing by providing information in either the User Program or Preset Program area. The dot
appears on the display for your reference in the following cases:
~
v-Thedot
•
When the current effect On/Off status matches the program a dot
appears.
Compare Function
I I I
t
Lt .
When editing program parameters. A dot appears to the lower
right of the value entered if it is the same as the value in the
saved version of the program.
The A4 also has a compare function which allows you to switch back and forth between edited and saved versions a programs. To use the
compare function, simply press the up and down Mode/Effect select buttons together. To return to the edited version of the program, press
these buttons again.
2. Using a Volume Pedal
With a volume pedal, it is possible to create a long, slow attack sound by gradually pressing down on the pedal after playing a chord or single
note.
Minimum volume
Connect to VOLUME pedal output jack.
Optional
KORG KVP-001
Connect the optional KORG KVP-001 volume pedal's output jack (OUTPUT) into the VOLUME pedal jack (PEDAL) of the A4 Guitar. Make
sure that the KVP-001 's volume slider has been set to the minimum volume of 0.
9