Connect To Wifi Using Wps Enabled Devices (Optional) - Huawei HG659 User Manual

To connect a wireless enabled device (computer, tablet, mobile phone etc) using the
default SSID and WLAN Key, complete the following steps:
1. Use your device's network connection manager or wizard to search for your WiFi
network. If you are not sure how to do this, refer to the help function for your
device's operating system, or the manufacturer's website or help desk.
2. Find and select your wireless SSID. Example: Telecom-T23456
3. When prompted enter your WLAN Key. Example: TT73H9VSK7
4. If the device connection manager allows you to save your SSID and WLAN Key
details then do so. Otherwise you may have to repeat these steps each time
you connect.
5. On your device open a web browser such as Internet Explorer, Safari, Firefox or
Chrome. If the a web page loads correctly and you can surf the internet, you are
connected to your WiFi network.
10
10. CoNNeCt to WIFI UsINg WPs
eNABLeD DeVICes (oPtIoNAL)
This Gateway supports WPS (WiFi Protected Set-Up) which is a quick method
of connecting a WPS enabled device to the Gateway. The connecting device must
support WPS and have wireless turned on. Check your device manual or the
manufacturer's website to confirm WPS support.
To connect, press the WPS button on the side of the Gateway for at least 2 seconds and
within 2 minutes, press the WPS button on the connecting device. The WPS button will
be a physical button on a device like a printer, or virtual such as a software button on a
computer, mobile phone or tablet.
The two devices will establish a connection and the Gateway will recognise the
wireless device.
This WiFi connection will remain until the Gateway is factory reset or until the WiFi
password is customised.
WPS button
11