5 - 2
MC40 Integrator Guide
WLAN Network Security Dialog Boxes
Figure 5-1
•
If the network security is Open, touch Connect.
•
If the network security is WEP or WPA/WPSA2 PSK, enter the required password and then touch
Connect.
•
If the network security is 802.1x EAP:
•
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, FAST or LEAP.
•
Touch the Phase 2 authentication drop-down list and select an authentication method.
•
If required, touch CA certificate and select a Certification Authority (CA) certificate.
Note: Certificates are installed using the Location & security settings.
•
If required, touch User certificate and select a user certificate.
Note: User certificates are installed using the Location & security settings.
•
If required, in the Identity text box, enter the username credentials.
•
If desired, in the Anonymous identity text box, enter an anonymous identity username.
•
If required, in the Password text box, enter the password for then given identity.
•
Touch Connect even if not broadcasting checkbox, to allow connections to APs with hidden SSIDs.
•
Touch Connect.
Touch
.
5.
Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network
when out of range.