Return; Sleep Timer; Muting - JVC AV 32D104 User Manual

Return +

The R + button has two functions:
ETURN
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
R + and hold for three seconds
ETURN
The channel currently active has been programmed as your return+ channel. Now scan through
R +
ETURN
• To cancel your Return+ channel, press and hold the R
message "RETURN CHANNEL CANCELLED!" will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the S
20 seconds before the automatic shutoff, this message will appear:
You then have 20 seconds to press the sleep timer button to delay the shut off for another

Muting

The M button instantly turns the volume down completely when you press it. Press
UTING
M and the volume level will instantly go to zero. To restore the volume to its previous level,
UTING
press M again.
UTING
RETURN CHANNEL
the channels using the C
You will return to your programmed channel.
T button
LEEP IMER
Sleep Timer Message
PUSH SLEEP TIMER BUTTON
TO EXTEND.
Button Functions
PROGRAMMED !
+/– buttons.
HANNEL
ETURN
GOOD NIGHT!!
15 minutes.
+ button for three seconds. The
41