Section 3 - Change And Remove Codes; Section 4 - Reset The Remote - Motorola MTS HDTV set-top box User Manual

Section 3 – Change and Remove Codes
A. Mode Deactivation
To deactivate a mode key, follow these steps:
1. Press and hold the appropriate mode key
2. Without releasing the chose mode key, press and hold the
3. Release both the mode key and the
4. Enter the appropriate 4-digit code from the list below depending on the mode you are deactivating:
a.
TV 1254
b.
DVD 2254
c.
AUX 3254
d. The mode key will flash three times indicating correct entry and return to normal operation
e. When an invalid code is entered, the selected mode key will give a long flash to indicate
that you have not entered the code correctly
f. Should the remote control time-out before you complete the setup, you will need to start
over
B. Reassign the Mode Keys to Another Device
The and keys are already set up to control specific devices:
TV, DVD AUX
key: TV & HDTV
TV
key: DVD
DVD
key: VCR, Home Theatre In the Box (HTIB), Receivers and Amplifiers
AUX
You may reassign these mode keys to operate another type of device. For example, you can control a
second DVD player in
AUX
1. Press and hold the
2. Without releasing the
3. Release both the
programming mode
4. Enter by pressing the number keys on the remote control – All the mode keys will flash twice
944
indicating correct entry
5. Press the mode key (i.e.,
6. Press the mode key you would like to reassign the device to – The selected mode key will flash
three time indicating successful reassignment and return to normal operations
Note: If any other key is pressed except the mode keys the
remote control will return to normal operation. Should the remote control time-out before you complete the
procedure you will need to start over.
Section 4 – Reset the Remote
A. To the Factory Default Settings
1. Press and hold the
2. Without releasing the
3. Release both the
programming mode
MTS HDTV Service
(TV, DVD
key – All the mode keys should flash twice
OK
mode, the same way you control the first DVD player in
key on the remote control
STB
key, press and hold the
STB
key and the key – All the mode keys will flash twice indicating
STB OK
or AUX) for the device you would like to reassign
TV, DVD
key on the remote control
STB
key, press and hold the
STB
key and the key – All four mode keys will flash twice to indicate
STB OK
or AUX) on the remote control
key simultaneously
OK
DVD
key simultaneously
OK
STB key will give a long red flash and the
key
OK
mode.
22