Troubleshooting; Searching For Your Code - Entone Digital TV User Manual

Troubleshooting

877-882-6386

Searching For Your Code

1. If your home entertainment device does not respond to the remote
control after trying all codes listed for your brand, or if your brand is not
listed at all, try searching for your code.
2. For example, after trying all the codes for your TV, you still cannot get
the remote control to operate your TV, then:
3. Turn on your TV
4. On the remote control, press TV once. Then press and hold SETUP until
the TV key blinks twice, then release SETUP.
5. Press the Power key once.
6. Aim the remote control at the TV.
auto-scan.
seconds intervals for each code set. The TV key will be on and blink every 5
seconds while in the device scan mode.
Note: In this search mode, the remote control will send IR codes from the
library starting from the lowest code set number to the end of code set for
that device; OR
second intervals for each code set. the TV key will be on and blink every 5
seconds while in the device scan mode.
Note: In this search mode, the remote control will send IR codes from the
highest code set number to the beginning of code set for that device.
60