Using The Help System; Vsw I Aap Remote Control; Contact Closure Remote Control; Ir 102 Infrared Remote Control - Extron electronics SW2 VGA Ars User Manual

Remote Control, cont'd

Using the help system

For information about program features, you can access the help
program in any of the following ways:
• Click Start > Programs > Extron Electronics >
Universal Switcher Control Help.
• From within the Windows-based switcher control
program, select Help > Contents on the task bar.
• From within the Windows-based switcher control
program, press the F1 key.

VSW I AAP Remote Control

Each input of an SW VGArs / Ars Series switcher can be
connected to a VSW I AAP passive interface. The VSW I AAP
features a computer video input and pass-through, an
unbalanced stereo input and pass-through, and an input select
(Show Me) button. Pressing the VSW I AAP's Show Me button
causes the switcher to select the input connected via that AAP.
SHOW ME
AUDIO
VSW I AAP
COMPUTER COMPUTER
VSW I VSW I
AAP AAP
100-240V 0.2A INPUTS
1 3
4
2
50-60Hz
SW6 VGA Ars
SHOW ME
AUDIO
COMPUTER VSW I AAP COMPUTER
VSW I VSW I
AAP AAP
Figure -12 — VSW I AAP application
SW VGArs / Ars Series Switchers • Remote Control
4-14
Projector
SHOW ME SHOW ME
AUDIO AUDIO
VSW I AAP VSW I AAP
COMPUTER
VSW I
AAP
REMOTE
SW6 VGA Ars SW6 VGA Ars
5
OUTPUT
OUTPUT
6
L R
SHOW ME SHOW ME
AUDIO AUDIO
VSW I AAP COMPUTER VSW I AAP
VSW I
AAP

Contact Closure Remote Control

The Remote connector also provides a way to select an input to
the switcher using a remote contact closure device. Contact
closure control uses pins on the Remote connector that are not
used by the RS-232 interface. The contact closure pin
assignments are shown in figure 4-1 on page 4-2.
To select a different input number using a contact closure
device, momentarily short the pin for the desired input number
to logic ground (pin 5). To force one of the inputs to be always
selected, leave the short to logic ground in place. The short
overrides front panel input selections.

IR 102 Infrared Remote Control

The optional Extron IR 102 kit consists of the following
components:
• IR 102 handheld remote control unit
• VersaTools IR 102 remote receiver with 3-foot cable and
RS-232 connector
• IR detector with 6-foot cable and captive screw connector
• External 12 VDC power supply
Install and operate the remote control in accordance with the
IR 102 User's Guide included with the remote.
SW6 VGA Ars Switcher
100-240V 0.2A INPUTS REMOTE SW6 VGA Ars
SW6 VGA Ars
1 3
5
OUTPUT
OUTPUT
2 4 6
L
50-60Hz
IR Detector
IR 102 Remote Control
Figure -1 — I 1 2 e ote application
SW VGArs / Ars Series Switchers • Remote Control
Power
Supply
R
3' Cable
RS-232
Control
6' Cable
IR-102
IR 102 Remote
Control Receiver
4-15