Setting The Projector - Panasonic UB-T580 Operating Instructions Manual

Setting the Projector

Set up your projector as instructed below.
About Positioning the Image
• When you are using a projector, make sure that
the projected image is inside the screen board.
• Do not project an image in the undetectable area.
Project the Image as a Rectangle
• Adjust the location of the projector to project at a
right angle with the elite Panaboard.
• If the image is projected trapezoidally, the
position may not be read correctly. Adjust the
projector so that the projected image is a
rectangle. Refer to your projector's
documentation for information on adjusting the
projected image.
Undetectable
Area
Set the Proper Resolution
• Set your computer's and projector's resolutions
to the most appropriate setting.
If the resolution is not set properly, the image will
be difficult to see. Particularly, if the projector's
resolution is lower than the computer's, thin lines
can appear cut or broken. Refer to your
projector's documentation for information on
adjusting the resolution.
Do Not Look Directly into the Projector
Lamp
• When using a projector, try to avoid looking
directly into the projector lamp. Doing so can hurt
your eyes.
Usage
1
21