(4) Remove the two bind B M4x12 Taptite screws, and then remove the LV insulation sheet.
(5) Remove the bind B M4x12 Taptite screw, and then remove the SW holder ASSY.
(6) Float the Fan motor 60 unit LV from the Frame R.
Note:
• Do not remove the Fan motor 60 unit LV at the above step.
SW holder ASSY
Fig. 5-77
6
5
5
Fig. 5-78
5-59
Taptite, bind B M4x12
LV insulation sheet
Fan motor 60 unit LV
Taptite, bind B M4x12
Frame R
<Right side>
Confidential