Getting Started; The Remote Control - JVC TM-2703U User Manual

Color monitor/receiver

Hide thumbs Also See for TM-2703U:

Table of Contents

Quick Setup

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you

need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult

other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first need to install the batteries (included).

With your thumb, push the latch on the back of the remote control inward, and while holding

it there, pull the battery cover out with your index finger. Insert the battery (included) carefully

noting the "+" and "–" markings. Push the cover back into place.

Key Feature Buttons

The four key feature buttons at the center of the remote

can be used for basic operation of the television. The top

and bottom buttons will scan forward and back through

the available channels. To move rapidly through the

channels using JVC's Hyperscan feature, press and hold

CH+ or CH–. The channels will zip by at a rate of five

channels per second. The right and left buttons will turn

the volume up or down. These buttons are also marked

with four arrows and are used with JVC's onscreen menu

system. To use the onscreen menus, press the M

button.

Getting Started

��

�

��

ENU

��

�

��

�

��

Table of Contents