Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha Star XVS13CAC Owner's Manual

4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
TIP
When installing the headlight bulb cov-
er, make sure the "TOP" mark faces up-
wards.
TOP
1. "TOP" mark
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND ADJUSTMENT

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
1
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal lens by re-
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
7-32
moving the screws.
1
pushing it in and turning it counter-
clockwise.
EAU24212
2
7