Manual Shutter Speed/Iris Adjustment - Panasonic HDC-HS250P/PC User Manual

Manual shutter speed/iris adjustment

Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
p Press the MANUAL button. (F 70)
1
Touch [SHTR] or [IRIS].
2
Touch / to adjust settings.
1/100 1/100 100
F
WB SHTR
Shutter speed:
SHTR
1/60 to 1/8000
p If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/30 and
1/8000.
p If [DIGITAL CINEMA] is set to [ON], the shutter
speed will be set between 1/48 and
1/8000. (When [AUTO SLOW SHTR] is set to
[ON], the range is 1/24 to 1/8000.)
p The shutter speed closer to 1/8000 is faster.
p The shutter speed will be set between 1/2 and
1/2000 in Still Picture Recording Mode.
Iris/Gain value:
IRIS
CLOSE (F16 to F2.0)
18dB)
p Value closer to [CLOSE] darkens the image.
p Value closer to [18dB] brightens the image.
p When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
p Press the MANUAL button again to restore to
the automatic adjustment.
p When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
72
VQT1Y31
IRIS MF
OPEN (0dB to
Manual shutter speed adjustment
p When the shutter speed is set lower than 1/15
in the Still Picture Recording Mode, using a
tripod is recommended. Also, white balance
cannot be set. The shutter speed will be set to
1/30 when the power is turned on again or
when the Quick Start is performed.
p If you increase the shutter speed manually, the
noise on the screen may increase.
p You may see a band of light around an object
that is shining very bright, or highly reflective.
p During normal playback, image movement
may not look smooth.
p If you record an extremely bright object or
record under indoor lighting, color and screen
brightness may change or a horizontal line
may appear on the screen. In this case, record
in Auto Mode or set the shutter speed to 1/60
in areas where the power supply frequency is
60 Hz, or 1/100 in areas of 50 Hz.
Manual iris/gain adjustment
p If the gain value is increased, the noise on the
screen increases.
p Depending on the zoom magnification, there
are iris values that are not displayed.