Table of Contents
Advertisement
Function
Microphone level
[AUTO]:
AGC is activated, and the
recording level is adjusted
automatically.
[SETT
]/[SET]:
The desired recording level
can be set.
AGC: Auto Gain Control
66
VQT1Y31
Effect/Setting method
When recording, the input level from the built-in microphones
can be adjusted.
p Change the mode to
p The Intelligent Auto Mode is set to off. (F 40)
1
Select the menu. (F 28)
[RECORD SETUP]
[MIC LEVEL]
2
Touch
/
to adjust the microphone input
level.
Center
Front left
Back left
Front right
Back right
Microphone input level
p Touch
to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When AGC is
disactivated, natural recording can be performed.
p A gain value for each of the 5 directions is displayed. (The input
level of the microphones cannot be set individually.)
p Adjust the microphone input level so that the last 2 bars of the
gain value are not red. (Otherwise, the sound is distorted.) Select
a lower setting for microphone input level.
3
Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
Microphone input level meter
.
[SETT
]/[SET]
Advertisement
Table of Contents
