Changing The Hearing Program; Via Push Button; Via Remote Control - Siemens Motion BTE User Manual

9

Changing the hearing program

Via push button

Example
Turn your hearing instruments on.

It is automatically in program 1. You want to change to
program 2.
Press the program button once.

You hear the acoustic signal for program 2.
You are now in program 2.

Via remote control

(not for Motion 100 series)
Refer to the remote control user guide.

Your Hearing Care Professional can write down the per-
sonal program configuration of your hearing instrument
on page 33.Your Hearing Care Professional can activate
or deactivate the acoustic signals in your hearing instru-
ments.
18
Your hearing instruments offer up to 5
hearing programs for specific listening envi-
ronments.
Each time you press the program button,
your hearing instruments switch to the next
program, confirming each change with an
acoustic signal.
Press the program button shortly to change the

program. Pressing the program button too long will
switch off the hearing instruments.