To Set Input Signal Selection - Eizo RadiForce RX840 User Manual

●

To set input signal selection

Setting
Auto ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual ThemonitordetectsonlythePC'ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalwith"Input".
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" with
4. Press to exit.
Note
• When "Auto" is selected for "Input Selection", the monitor's power saving function works only when all PCs are in the
power saving mode.
Function
.
or .
.
Chapter7Reference
33