Denon AVP-A1HDCI Owner's Manual page 3

FCC Information (For US customers)
o
NOTE ON USE I OBSERVATIONS RELATIVES A l'UTILISATION
1. COMPUANCE INFORMATION
Product Name: AV Surround Pre-Amplifier
Model Number: AVP-A1HDCI
This product contains FCC 10: BV2- MPGBR052.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
this
product may not cause harmful interference, and (2) this product must accept any interference received, including
interference that may cause undesired operation.
Denon Electronics (USA), LLC
100 Corporate Drive, Mahwah, NJ 07430-2041
Tel. 201-762-6500 (Main)
2. IMPORTANT NOnCE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.
• Keep the unit free from moisture. water.
and dust.
• Proteger I'appareil contre I'humidite. I'eau
et la poussiere.
• Do not let foreign objects into the unit.
• Ne pas taisser des objets etrangers dans
I'appareil.
• Do not let insecticK:Jes, benzene, and
thinner come in contact with the unit.
• Ne pas mettre en contact des insecticides,
du benzene et un diluant avec rappareil.
• Never disassemble or modify the unit in
any way.
• Ne jamais demonter au modifier I'apparell
d'une maniare ou d'une autre.
-.I \
1j~~J..1
\
ll\(7~\W
• 0: .......
• (For apparatuses with ventilation ho'es)
• Unplug the power cord when not using the
unit for long periods of time.
• Debrancher le cordon d'alimentation
Iorsque l'appareil n'est pas utilise pendant
de Iongues periodes.
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d'aeration.
• Avoid high temperatures.
Allow tOf' sufficient heat disperSIOn when
installed in a rack..
1 - - - - - - - - - - - - - - . ,
• Eviter des temperatures elevees.
Tanir compte d'une dispersion de chaleur
suffisante lars de l'installation sur una
atagare.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuk3r le cordon d'alimentation avec
precaution.
Tenir la prise k>rs du debranchement du
cordon.
IC Information (For Canadian customers)
3. CAUTION
• To comply with FCC RF exposure compliance requirement, separation distance of at least 20 cm must be
maintained between the antenna of this product and all persons.
• This product and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
4. NOTE
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an experienced radiorrv technician for
help.
1. PRODUCT
This product contains IC 6963A-MPGBR052,
This product complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1)
this product may not cause harmful interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
APPAREll
Cet appareil contiens IC 6963A· MPGBR052,
Cet appareil est con forme II la norme CNR-210 du Canada. L'utilisation de ce dispositif est autorisee seulement
aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) I'utilisateur du dispositif doit etre
pret II accepter tout brouillage radioelectrique re~u, meme si ce brouillage est susceptible de compromettre Ie
fonctionnement du dispositif.
Cet appareil numerique de la c1asse Best conforme II la norme NMB.Q03 du Canada.
2. CAUTION
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotrapically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
ATTENTION
Afin de rMuire Ie risque d'interference aux autres utilisateurs, il faut choisir Ie type d'antenne et son gain de
fa~on
II
ce que fa puissance isotrope rayonnee equivalente (p.i.r.e.) ne soit pas superieure au niveau requis pour I'obtention
d'une communication satisfaisante.
IT
FCC Information (For US customers)
o
NOTE ON USE I OBSERVATIONS RELATIVES A l'UTILISATION
1. COMPUANCE INFORMATION
Product Name: AV Surround Pre-Amplifier
Model Number: AVP-A1HDCI
This product contains FCC 10: BV2- MPGBR052.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
this
product may not cause harmful interference, and (2) this product must accept any interference received, including
interference that may cause undesired operation.
Denon Electronics (USA), LLC
100 Corporate Drive, Mahwah, NJ 07430-2041
Tel. 201-762-6500 (Main)
2. IMPORTANT NOnCE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.
• Keep the unit free from moisture. water.
and dust.
• Proteger I'appareil contre I'humidite. I'eau
et la poussiere.
• Do not let foreign objects into the unit.
• Ne pas taisser des objets etrangers dans
I'appareil.
• Do not let insecticK:Jes, benzene, and
thinner come in contact with the unit.
• Ne pas mettre en contact des insecticides,
du benzene et un diluant avec rappareil.
• Never disassemble or modify the unit in
any way.
• Ne jamais demonter au modifier I'apparell
d'une maniare ou d'une autre.
-.I \
1j~~J..1
\
ll\(7~\W
• 0: .......
• (For apparatuses with ventilation ho'es)
• Unplug the power cord when not using the
unit for long periods of time.
• Debrancher le cordon d'alimentation
Iorsque l'appareil n'est pas utilise pendant
de Iongues periodes.
• Do not obstruct the ventilation holes.
• Ne pas obstruer les trous d'aeration.
• Avoid high temperatures.
Allow tOf' sufficient heat disperSIOn when
installed in a rack..
1 - - - - - - - - - - - - - - . ,
• Eviter des temperatures elevees.
Tanir compte d'une dispersion de chaleur
suffisante lars de l'installation sur una
atagare.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Manipuk3r le cordon d'alimentation avec
precaution.
Tenir la prise k>rs du debranchement du
cordon.
IC Information (For Canadian customers)
3. CAUTION
• To comply with FCC RF exposure compliance requirement, separation distance of at least 20 cm must be
maintained between the antenna of this product and all persons.
• This product and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
4. NOTE
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an experienced radiorrv technician for
help.
1. PRODUCT
This product contains IC 6963A-MPGBR052,
This product complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1)
this product may not cause harmful interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
APPAREll
Cet appareil contiens IC 6963A· MPGBR052,
Cet appareil est con forme II la norme CNR-210 du Canada. L'utilisation de ce dispositif est autorisee seulement
aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) I'utilisateur du dispositif doit etre
pret II accepter tout brouillage radioelectrique re~u, meme si ce brouillage est susceptible de compromettre Ie
fonctionnement du dispositif.
Cet appareil numerique de la c1asse Best conforme II la norme NMB.Q03 du Canada.
2. CAUTION
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotrapically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
ATTENTION
Afin de rMuire Ie risque d'interference aux autres utilisateurs, il faut choisir Ie type d'antenne et son gain de
fa~on
II
ce que fa puissance isotrope rayonnee equivalente (p.i.r.e.) ne soit pas superieure au niveau requis pour I'obtention
d'une communication satisfaisante.
IT