Denon AVP-A1HDCI Owner's Manual page 16

•
•
o
- - A U D I O - -
COAXiAl AUDIO
OUT OUT
L R
00
v I O E O - - - -
VIDEO S VIDEO COMPONENT VIDEO HOMI
OUT OUT
our
OUT
Y ... PR
o
0 OV~
DVD Player
o Connect the cables to be used.
o With HDMI connections, the video and audio signals can be transferred
with a single cable.
DVD player
Carefully check the left
(l)
and right
(A)
channels and the inputs and
outputs. and be sure to interconnect correctly.
o Connect an HDP (High-Definition Player) in the same way.
o When using an optical cable or a BNC cable for the digital audio
connection, make the settings at GUI menu "Source Select" - "DVD"
- "Assign" - "Digital" l!2iFpage 46)
o When using a BNC cable for the component video connection, make
the settings at GUI menu "Source Select" - "DVD" - "Assign" -
"Component" l!2iFpage 47).
VIDEO S vIDEO COMPONeNT VIDEO HOMI
IN tN IN IN
Y .. PR
U
0
OOU
c::::J
- - - - V i D E O
o Connect the cables to be used (!2iFpage 9 "Video Conversion
Function")
o With HDMI connections, the video and audio signals can be
transferred with a single cable.
o To output the audio signals to the monitor with HDMI connections,
set GUI menu "Manual Setup" - "HDMI Setup" - "Audio" to "TV"
(!2iF page 32)
r-
Monitor
-t"·".
o Use a CPPM-compatible DVD player to play DVD-Audio discs that
are copyright-protected by CPPM.
o The audio signals output from the HDMI connector (sampling
frequency, bit rate, etc.) may be restricted by the connected
device.
o Video signals are not output properly when uSing devices that are
not HDCP-compatlble.
o Video signals are not output if the input video signals do not match
the monitor's resolution In this case, sWitch the DVD player's
resolution to a resolution with which the monitor is compatible.
o If the GUI menu "Manual Setup" - "HDMI Setup" - "Audio"
setting (!2iFpage 32) IS set to "Amp", the sound may be
interrupted when the monitor's power is turned off.
o Use a cable on which the HDMIIogo is indicated (a certified HDMI
product) for connection to the HDMI connector. Normal playback
may not be possible when using a cable other than one on which
the HDMIIogo is indicated (a non-HDMI-certified product)
o If the monitor or DVD player does not support Deep Color, Deep
Color signal transfer is not possible.
o If the monitor or DVD player does not support xvYCC, xvYCC
signal transfer is not possible
olf the monitor does not support "Auto lip sync Correction"
function, this function will not work.
o The AVP-A 1HDCI is compatible with the HDMI's CEC (Consumer
Electronics Control) function. Please note the following .
• It may not work depending on the device it is connected to and
its setup.
• It does not operate with televisions or players that are not
compatible with HDMI's CEC.
o When the AVP-A 1HDCI and DVD player are connected using an
HDMI cable, also connect the AVP-A 1HDCI and monitor using an
HDMI cable.
o If the connected monitor or DVD player only has a DVI-D
connector, use an HDMI/DVI converter cable. When using a DVI
cable, no audio signals are transmllted.
o Use a Deep Color compatible cable for connection to Deep Color
compatible devices.
tfi(th_
o The component video connectors may be indicated differently on
your monitor. For details, see the monitor's operating instructions.
o The audio signals output from the HDMI connectors are only the
HDMllnput signals
I
13