Dubbing - JVC PC Connection Kit Instructions Manual

Dubbing

You can record all programmed scenes onto
a tape in the recorder.
1
Make sure there is an erase protection
tab on the tape. Insert it into the
recording deck and set the recording
deck to the Record-Pause mode.
2
Click Auto Edit.
When editing stops, the video source
unit enters the Stop mode and the
recording deck enters the Record-Pause
mode.
•When "Tape Change" occurs during
dubbing, editing will stop and a
message requesting tape change will
appear. Change the tape and click OK.
3
Stop the recorder.
43
EN