Playing Back One Programmed Scene; Playing Back All Programmed Scenes - JVC PC Connection Kit Instructions Manual

42
EN
Preview
Auto Edit
BASIC OPERATIONS (cont.)

Playing back one programmed scene

1
Click on the line where the In/Out points
you want to preview are displayed to
highlight that line.
2
Click Preview.
•The video source unit locates the scene
by going to a point prior to the In point,
then starts playback at the In point.
Playback stops after the Out point is
passed.

Playing back all programmed scenes

1
Click Auto Edit.
•The video source unit plays back
scenes in numerical order and stops
immediately after the last scene's Out
point.
NOTES:
• If Preview or Auto Edit is clicked at the end
of the tape, the video source unit will not
function properly.
• If the source tape has any blank portions on
it, scenes will not be edited properly.
• If using a VCR with JLIP terminal as a
recording device, click Auto Edit without
inserting a video cassette.