Switching On And Off - Miele KFN 12823 SD edt Operating And Installation Instructions

Frost free fridge freezer with dynamic cooling
Hide thumbs Also See for KFN 12823 SD edt:
Table of Contents

Advertisement

Before using for the first time
The stainless steel door (and sides,
depending on model) and the stainless
steel trim to the interior shelves and the
door shelves have a layer of protective
foil to prevent damage during
transportation.
^ Do not remove this foil until the
appliance has been installed or built in.
^ After removing the protective foil,
treat the stainless steel door with the
stainless steel conditioning agent
supplied (also available from
www.miele-shop.com).
Important: The stainless steel
conditioner gives long lasting
protection, and helps to prevent
resoiling.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
^ Clean the sides of the appliances
with a damp, clean cloth and then
dry them with a soft cloth.
Important:
To ensure the correct functioning of the
appliance, let it stand for between 1½
and 2 hours after transporting it to its
final location before connecting it to the
mains.

Switching on and off

Switching on
The refrigerator and freezer sections are
switched on together by pressing the
master switch on the right hand side of
the control panel, or by pressing the
On/Off button on the left hand side of the
control panel.
^ Press the master switch on the right
hand side of the control panel.
The temperature display for the
refrigerator section will show the
selected temperature setting. The
temperature display for the freezer and
the alarm indicator light will flash until
the freezer section has cooled down to
the correct temperature for freezing.
The appliance will start cooling down
and the interior light in the refrigerator
section will come on if you open the
door.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top drawer of
the freezer. The cool pack will be at its
most effective after it has been in the
freezer for approx. 24 hours.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kfn 1223 sd edtKfn 1223 sd edt-1

Table of Contents