Table of Contents
Advertisement
Switching on and off
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see "Cleaning and
care").
Connecting the appliance
Connect the refrigeration appliance to
the electricity supply as described in
"Electrical connection".
will then appear on the appliance
Miele
display, followed by .
Filling and inserting the water con-
tainer for the humidifier
Fill the water container for the humid-
ifier with fresh drinking water (see
"Storing food in the PerfectFresh Ac-
tive zone – Humidity-controlled com-
partment").
Place the water container in the divid-
ing plate between the refrigerator
section and PerfectFresh Active zone
(see "Storing food in the PerfectFresh
Active zone – Humidity-controlled
compartment").
40
Switching on the appliance
Open the appliance door.
Tap on the display.
The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.
The refrigeration appliance will adjust to
the preset temperature.
To enable the temperature to get suf-
ficiently cold inside the refrigeration
appliance, allow the appliance to run
for a few hours. Do not place food in
the refrigeration appliance until it has
reached the preset temperature.
Switching off the appliance
Touch the temperature display on the
display.
Swipe right until is shown in the
middle.
Tap .
The cooling and interior lighting are
switched off.
will appear in the display.
Please note: the refrigeration appli-
ance is not disconnected from the
power supply when it is switched off.
Advertisement
Table of Contents
