Installing The Software (For Windows ® Me) - JVC USB Connection Kit Instructions Manual

8
EN
Installing the Software
(For Windows ®
For details on the basic operation of Windows
refer to the instruction manual provided with your
computer or Windows
Preparation
®
Start Windows Me.
If you are running other software, close that
software. (Make sure that there are no other
application icons open on the task bar.)
1
Turn the camera's POWER switch to "
2
Press the "MEMORY PLAY" button on the
camera.
3
Connect the camera to the computer using
the provided USB cable. (
•The "Add New Hardware Wizard" window
will appear.
•"USB MODE" appears on the LCD panel.
4
Load the provided CD-ROM to the CD-ROM
drive.
5
Click the "Next" button.
6
Select the "JVCDSCME.INF" in the "ME"
folder, and click the "OK" button.
7
Click the "Finish" button.
Me)
®
Me.
pg. 5)
SECTION FOR Windows
® Me,
".
®
(cont.)