Installing The Software (For Windows ® 98) - JVC USB Connection Kit Instructions Manual

6
EN
Installing the Software
(For Windows ®
For details on the basic operation of Windows
refer to the instruction manual provided with your
computer or Windows
Preparation
®
Start Windows 98.
If you are running other software, close that
software. (Make sure that there are no other
application icons open on the task bar.)
1
Turn the camera's POWER switch to "
2
Press the "MEMORY PLAY" button on the
camera.
3
Connect the camera to the computer using
the provided USB cable. (
•The "Add New Hardware Wizard" window
will appear.
•"USB MODE" appears on the LCD panel.
4
Load the provided CD-ROM to the CD-ROM
drive.
5
Click the "Next" button.
6
Click the "Next" button.
7
Confirm that "CD-ROM drive" has been
checked, then click the "Next" button.
•When the loaded CD-ROM is not found,
click "Browse" button and select the
provided CD-ROM.
8
Click the "Next" button.
9
Click the "Finish" button.
98)
® 98.
pg. 5)
SECTION FOR Windows
®
98,
".
®
(cont.)